Custom Two Person Tournament Cribbage Boards

Created two of these boards again for trophy's for a senior center cribbage tournament in California.
They are made out of hard maple and measure in at 3 inches wide and 21 1/2 inches long. A slot is routed on the back to hold the custom metal pegs which come with the boards.

Computer design layout.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Three person Africa Shaped Cribbage Board

 This custom shaped three person cribbage board was cut into the shape of Africa.  It is headed to its new home in  Oregon state...
It is around 18 inches long x 16 inches wide and made out of dark walnut. 

Several coats of satin finish has been applied and it is looking nice..

Slot to hold custom metal pegs on back of board

Back from being cutout and drilled. Wow look at that grain pattern.

Getting ready for cutout and drilling.

Computer design

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Hard Maple Cutting Board

 This Custom cutting board with drip line and handle is being shipped to Missouri as a birthday present. It was made out of hard maple and measures in at 19 inches long x 12 inches wide and 1 1/4 inches thick.

It was designed as a two sided use board.  One side has a drip slot routed into the board to catch juices from meat etc..  The other side was left smooth for cutting vegetables, breads,   etc....

As always I use a food grade mineral oil to coat the boards for preservation and protection.

Smooth side for vegetables, breads.... etc

Drip slot to catch juices etc.....

Cut to shape with handle hole cut out.

Design layout I did on computer

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Personalized Five Person Cribbage Board

This request was for a five person board.  It was created out of hard maple and has the personal lasered name in the center.
The board measures in at 18 inches long and 8 inches wide and is 1 inch thick.  There is a slot on the back to hold the custom metal pegs that accompany each board.

Finish has been applied.

Name has been lasered into the board.

Board drilled and cut to shape.

Computer layout for this custom five person cribbage board.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Personalized Four Person Cribbage Board

Created this custom four person cribbage board for a client in North Carolina. This design which was just recently created is already becoming a popular one.

It measures in at 8 inches wide and 18 inches long and will be made out of Maple. I routed a key hole hanger on the back so the board can be hung on the wall when not being played.

First coat of finsh has been applied.

Keyhole hanger hole and slot for custom metal pegs.

Board cut to shape and edges routed.

Back from drilling and lasering..

Computer layout of the board.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Benches for Bean Table...

The Bean Table was such a big hit that matching benches were quickly requested to go along with it. Well sort of matching..everything except the color....  Whats a Grandpa to do? How could I refuse?

These benches were created using some local harvested pine milled by my favorite family lumber mill.  They measure in at 20 inches wide and 14 inches tall.  Extra storage was requested and provided in the top of the benches.

And another use for the bean table... How darling is this?  

This table and new benches are mommy tested and approved.

Ahhh..hidden storage for my dolls....

different angle

First coat of paint

Primer is on...

All sharp edges on these benches have been rounded over
and are now ready for some fine sanding...then primer....then the paint.
Wait till you see the color she picked for this.

Storage space was requested in the top of these benches...Looks like I left some sawdust for her to use in her sensory table..

Piano hinge has been installed on top of bench and felt pads placed on the front corners
to protect little fingers from being smashed.

A little corner detail added to match the table.

Glue up in progress.

Cut to fit and now ready for glue up

Dry fitted..... looking not too bad.

These benches will go for use with this "Bean Table"

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Four Person Cribbage Board for 40 year Retirement.

This custom cribbage board is a retirement gift from the wife to her husband....and will surely become a family heirloom.
It is being made out of Maple and measures in at 8 inches wide and 18 inches long.

The board has been routed with a decorative edge and the custom storage slot placed on the back for the custom pegs.

Once it was finely sanded, a hand rubbed polyurethane finish was applied to protect the wood.  The custom lasering was done by Northern Lights Engraving.

The edge is done and the first coat of poly had been applied..

Slot on back for custom metal pegs storage.

Just back from laser shop..

The layout I created in CoralDraw

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Beer Bottle Shape Four Person Cribbage Board

This custom cribbage board was created for a client in this beer bottle shape with a custom logo being lasered into the board.  It measures in at 19 inches tall and 8 1/4 inches wide.  A slot was added to the back for storage of the custom metal pegs.

Once it was finely sanded, a hand rubbed polyurethane finish was applied to protect the wood.  The custom lasering was done by Northern Lights Engraving.

Finishing is completed and board is ready to ship.

Slot on back for custom metal pegs.

Polyurethane has been applied...

Close up of lasered logo

Back from CNC and laser shop. The edges have been temporarily
left on so I have a straight edge to rout the storage slot
for the custom metal pegs on the back.

Computer generated layout.....

Custom logo provided by the client.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/