Custom Sailboat Two Person Cribbage Board

 Custom sailboat two person cribbage board was made for a client to give as a gift.  This board measures in at 23 inches long x 6 inches wide x 3 inches tall.

Sapele Mahogany was used to make the main deck and birch for the bottom two layers.  The holes and shape was created using a CNC router system.

The process required to make this boat takes a few extra steps, but the wait is well worth the finished product.

Hand rubbed polyurethane was use to coat and protect it.

Finished boat top view.

Finished boat side view.

Out of glueup and shaped by the bandsaw..starboard side

Out of glue up and shaped by the bandsaw ..port side

Just out of glue up

Boat in glue up

All three levels ready for glue up

CNC drilling the peg and card pockets

CNC drilling the holes

Photo with sailboat name example.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

More Pizza Peels for 1000 Degree Pizzeria

More custom pizza peels being created for 1000 Degree pizzeria.

Being made out of local birch with their logo highlighted.  They will be used as display above their counters The black part of the logo was painted after being cut in using a CNC router system.
They have a 32 inch x 32 inch peel with a 24 inch handle.

Finished

Painting of Logo

Logo is painted by hand

Sanded and cleaned for painting

Glued up and ready for CNC cutout.

Sanding

Glue up

The beginning of the process

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Two Person Anchor Cribbage Board

Custom cribbage board created out of dark walnut with the anchor being made out of hard maple and is

12 inches wide and 15 1/2 inches long..

The back board measured in at 16 inches wide and 18 1/2 inches long.  The anchor was attached on top of the walnut to help it stand out.

The lasered logo was chosen by the client and  reads as follows.


"You be the anchor that keeps my feet on the ground,

I'll be the wings that keep your heart in the clouds."

Finished project.

Anchor glued up and ready for finishing.

Storage slot for custom metal pegs

Gluing the anchor to the back board

Quote has been lasered on

Close up of quote

The anchor cur and drilled.

The CNC drilling and cutting the shape

One of these will be inlayed in the top of the anchor.

Designed layout of board in CorelDraw

Client sample layout.....

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Large Custom Cherry Four Person Cribbage Board

This large four person Custom Cribbage Board was made out of Cherry and created for a client in Minnesota to give as a birthday gift.

The board is around 28 inches long and 12 inches wide. It is a four person board and has a slot on the back to hold the custom metal pegs when not in play.

CorelDraw was used to design and lay this drawing out.  This program gives me great freedom to basically create any board design I want to create or re-create.

Finished and ready for many games

Extra large custom metal pegs and deck of Jumbo cards go with this board.

Once it was formatted a ShopBot CNC router was used  to drill the holes, router the guidelines and do the lettering on the board.  The border trace lines will be cut to create the actual board size.

Once that is done then the edging and the slot on the back for pegs will be done with a basic router.

Slot cut on back for storage.

Finally, the sanding process will begin.
Then the hand rubbed polyurethane finish will be applied once the final sanding has been completed.

Holes drilled and outline cut.

This board is different and actually is something I have heard a lot of comments about at shows,  markets and from web inquiries.  Folks have trouble following their track around the board. This design will have engraved lines between each track and with the groups of five also separated.

In addition, there are triple S's be placed between holes 30 and 35 for triple skunk, double S's be placed between holes 60 and 65 for double skunk, and one S be placed between 90 and 95 for a standard skunk.
" Start" has been added after the home start pegholes and "YAHOO" at the pegout hole.

Rough piece of Cherry which this board will be created out of.

Layout created using CoralDraw

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Cribbage Board "The Adirondack Park"

This custom cribbage board is being created using White Pine and cut into shape of  Adirondack Park in up state New York. This is a Christmas present for a unsuspecting father.

It measures in at 13 inches wide by 16 long and 1 1/2 inches thick.

Poly finish being applied

Lasering done..ready for final sanding

Slot and cover made for pegs  on back

Shape and holes drilled and cut. Waiting on the laser shop now.

Outline borders of Adirondack Park.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Lower Michigan Shaped Cribbage Board Table

This custom shape cribbage board table top was created in the shape of Lower Michigan.
This project was a interesting and challenging one to work on.  The  2 feet high legs had to be strategically placed to create a solid base for the table.  The irregularly shaped top which measured in around 18 inches wide and 24 inches long made this fun.
The cribbage track was custom drilled to hold  larger than normal 3/16 inch custom metal pegs.

Dark walnut was used in this project finished off with a hand rubbed polyerthane.

Finish has been applied and it is ready to ship.

The legs were glued and screwed with the hole being plugged with a contrasting wood.

End view 

Custom top shape of Lower Michigan.

Computer created layout and shape of cribbage board.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/