Custom 20 Inch Pizza Peel for Poppi's Pizza Inc in Wynnewood, PA

This custom pizza peel is being created for a client in Poppi's Pizza Inc in Wynnewood, PA .   It is a 20 x 20 inch paddle with a 15 inch handle and was built out of birch. 
A food grade mineral oil was applied to protect the wood.

Oiled and ready to ship

Out of glue up and being shaped

in glue up

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Two Person Anchor Cribbage Board

Custom cribbage board created out of dark walnut with the anchor being made out of hard maple and is

12 inches wide and 15 1/2 inches long..

The back board measured in at 16 inches wide and 18 1/2 inches long.  The anchor was attached on top of the walnut to help it stand out.

The lasered logo was chosen by the client and  reads as follows.


"You be the anchor that keeps my feet on the ground,

I'll be the wings that keep your heart in the clouds."

Finished project.

Anchor glued up and ready for finishing.

Storage slot for custom metal pegs

Gluing the anchor to the back board

Quote has been lasered on

Close up of quote

The anchor cur and drilled.

The CNC drilling and cutting the shape

One of these will be inlayed in the top of the anchor.

Designed layout of board in CorelDraw

Client sample layout.....

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Two Person round Cribbage Board with Trails End Logo

Custom two person cribbage board was created for a client as a Christmas gift for their daughter. The lasered logo was chosen as a tribute and a reminder of  their family heritage.

Dark walnut was used for this board and the circle measured in at 14 1/2 inches. It was finished with a hand rubbed polyurethane.

Finished project

Circle cut to shape after slot cut on back

Storage slot on back for custom metal pegs

Lasered and drilled

Dark walnut chosen for this project

Layout created in CorelDraw

Logo chosen by client.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Large Custom Four Person Cherry Cribbage Board

This four person cribbage board is for a client who is giving this one as a Christmas present.  They have liked this style so well that this is a repeat order.

The custom metal pegs that come with the board fit the 3/16 inch holes and are 2 inches tall.

It was created using Cherry and  measures in at 11 1/2 inches wide x 27 inches long.

 

Finished board

Routing the slot on back for storage of custom pegs

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom 13 Inch Mahagany and Walnut Pizza Peel

This custom peel is being created for a client to give to her brother as a Christmas Gift.
It was created using walnut for the handle and mahogany for the sides and measured in with a 13 x 13 inch peel and was lasered engraved with her brothers business name.

Finished

Back from laser shop

Shaped and sanded

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Pizza Peel for Patrick Jane's Gourmet Pizza Bar in North Carolina

Custom pizza peel created for Patrick Jane's Gourmet Pizza Bar in North Carolina

This is an additional peel being created for them with some changes to make it easier to use.

It has a 11 x 30 inch paddle with an 16 inch handle. The change in the  handle was made to make the peel easier to handle.  I think it also makes it look unique

Oiled and on its way.

Taper on the handle

Almost ready

Handle being shaped

in glue up

Layout of original peel,  Handle offset on this one by request. Check photos out above.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Hard Maple Large Three Person Cribbage Board

 This request came from the son of an 87 year old Mother in Chatham Ontario, Canada, who had played and loved cribbage since she was 20 years old.

 However, age has made it difficult for her to handle the pegs and see the board.  So this board was created with larger 3/16 inch x 1 1/2 inch pegs and the tracks were outlined to make it easier for her.

I am blessed to create this custom board for them.

Finished

It measures in at 10 inches wide and 28 inches long and has a storage slot on the back.

 In addition it was requested to paint the three tracks red, white and blue to make them easier to see.

Custom 3/8 x 1 1/2 inch metal pegs

 

Slot on back for storage of custom metal pegs

Painting completed

Painting in progress by my wonderful assistant.

The board has been drilled and lined using a CNC router system

Design created in CorelDraw.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Oak Round Cribbage Board With Hawkeye Logo.

This custom four person round cribbage board is made out of oak and is 14 1/2 inches with storage slot on back.

 The logo was lasered in and then stained to give it a darker look.

 

 

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/