Tuesday, June 12, 2012

Custom Walnut Travel Cribbage Board

This Custom Walnut Travel Cribbage Board was requested through my Custommade.com page.
The card and peg storage was created inside.  Lasered personal photo and lettering were added using an Epilog laser.

This custom travel board measures in at 3 1/2 inches wide and 14 inches lone when open. When closed it comes in at 7 inches long.  Just right for storing in your backpack or suitcase when traveling.



Finished board.

Lasered lettering and photo


Inside storage for cards and pegs

cut and drilled

prototype sent to client



Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Monday, June 11, 2012

Custom Pizza Peel Heading to Hawaii



This Custom Birch pizza peel with 18 inch peel and a 24 inch handle is headed to Hawaii.

Custom lasering done by Northern Lights Engraving in Columbia Falls, Montana using an Epilog laser.

Custom lasering oiled and ready to go.



just back from laser
Being molded and shaped.


Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Wednesday, June 6, 2012

Custom Mahagany Pizza Peel

Comments and photo just received from client:
Hi Dave,   Attached is a picture of the first pies made using the peel you made. It worked perfectly with the wet dough. They slid off the peel like they were floating on air. Very good job. Marc




This custom peel will be used in a wood fired oven.  It has a 5 foot handle with a 14x12 inch paddle and is crafted using mahogany.  It was left unfinished at the clients request.










Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Oak Pull Out Cutting Board

This custom board was made using red oak and is 24 inches long x 18 inches wide and 3/4 inch thick.
The breadboard ends were added to help keep the board level for sliding out of the slot in the cabinet.
There are finger groove pulls on each end opposite sides so that you could use both sides of the board.



Finished board











Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Sunday, June 3, 2012

Custom Birch Pizza Peel

This custom peel was created for a client in New York.
The paddle is 14 inch x 14 inch with a 24 inch handle, and made out of birch
Personalized lettering laser engraved on front.


Finished custom pizza peel
Lasered tip of peel


Peel in glueup





Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Basball Field Shape Cribbage Board.

Dave......... Got the Board..... looks Fabulous....... Thank you. John


ps.... Thanks for the deck of cards...... we need the jumbo's nowadays


Custom Blue Board Pine cribbage board has departed to its new home in California. It measures in at
13 x 13 inches and is a three person track.

In the infield I put a lasered personal inscription for the client.




Finished Custom Cribbage Board

Personalized lasered text has been added.


Board has been drilled and and cut to size.



Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/