Sunday, June 19, 2011

Two Person Custom Boat Cribbage Board

Comments received from client June 24, 2011:
Dave, He absolutely loves it! Was speechless! Thank you so so much! It looks amazing!
 Jen :)



This custom cribbage was created from the bottom photo for a client to give as a birthday gift.  It will soon be sailing off to Connecticut.

It was created out of hard Maple and is  9 inches wide x 20 inches long.







layout created using CorelDraw
In creating this board, I have to trace the outline in CorelDraw and create the layout.  Depending on the photo provided it sometimes can be a challenge.  This one wasn't too bad.



Photo used for layout
This is one of the photos the client sent me to use for the board outline.


Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Tuesday, June 14, 2011

Custom Pizza Serving Trays

These boards were created for a pizzeria in New Jersey.  The various size circles will go into a metal tray to place the pizza's on while being cut and served.  The larger circles are 22 inches in diameter and the smaller ones are 18 inches.

These boards are made out of 3/8 inch thick birch and coated with a wood grade mineral oil.


Custom Birch  pizza trays



Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Monday, June 13, 2011

Custom Walleye Cribbage Board Heads To Colorado

Custom Three Person Walleye Cribbage Board
Many fish stories will be told over this custom cribbage board.  It was created out of Hard Maple and is 10 inches wide and 23 inches long.  As with all cribbage boards there is a slot in the back for storage of the custom metal pegs which are included with each custom board.

The shape was cut out using a CNC router system,with the holes being hand drilled.
The name personalization was done using an Epilog laser system.

Stay tuned for more updates soon......:-) ****************************************************************
For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/