Custom Maple Cutting Board

Custom cutting board 16 inches square made out of hard maple and coated with a food grade mineral oil.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Maple and Oak Pull-out Cutting Board

This custom slide out cutting board was created for a client to replace their old one.

It measures in at 5/8 inch thick, 17 7/8 inches wide, and 24 inches long.  I used hard maple for the center cutting surface and oak for the breadboard ends.  The ends purpose are twofold, one to add to the look and two to help keep the board flat.

Once the board was finished I apply several coats of a food grade mineral oil to help preserve it.

Several coats of food grade mineral oil drying and it is ready to be shipped.

Custom finger groove on bottom side to aid in pulling out of cabinet slot.

Glued up and ready for edges to be rounded over, finger grooves cut, and sanded.

Maple boards cut to size..Oak boards laid out and will be cut to match ends of maple

Raw Maple and Oak for cutting board

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Medium Size Custom Cribbage Board with Skunk Lines......

 After many requests, here is the scaled down version of one of my larger boards.  It measures in at around 8 inches wide and 22 inches long.  It is a four person and comes with custom metal standard size 1/8 inch pegs and a deck of cards.  Each track is separated by a routed line to make it easy for players to stay on their own track..

Board is ready for final sanding and finish..

Routed edge

Custom Cribbage Board has been drilled and lined...

This is scaled down version of much larger board in CoralDraw

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom "Wolf Dream" Three Person Triangle Cribbage Board

This custom three person cribbage board was created to the client specific request using a photo they provided for the center logo.  The photo they sent was actually a tattoo on an arm. 

Using maple for this 16 1/2 inch triangular shape has been a lot of fun and I think it turned out very well. Finish has been applied and it will ship soon.

Finish has been applied....

Just back from lasering......

Storage slot for custom metal pegs.

Hole have been drilled and board is cut to shape..A piece of Alder was used for the inlay of the start point..

Project laid out in CorelDraw

This is the photo I started with in the creation of this project.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Thank you for your support!!!!

Remember the dollars spent in this country stays in this country! Buy items made in the USA!



Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom 12 Inch Pizza Peel for Glacier Grill and Pizza

Finished custom 12 inch Birch pizza peel with 18 inch long handle.

As is typical with my peels, the peel is shaped to around 1/8 inch thick on the bottom with a beveled edge.  The top of the peel is around 3/16th inch thick and the handle is left as thick as possible to provide strength and support when using the peel.

Each peel is individually shaped and molded to meet specific requirements for each peel.

Shaping the handle

In glue-up..

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Oak Cribbage Board with Inlayed Walnut and Bloodwood Strips

This Custom Two Person Cribbage Board was created using Oak for the wider sides and strips of walnut and bloodwood for the inlayed center.  As you can see the wood grain and colors go well together.  It measures in at 6 1/2 inches wide, 17 inches long and 1 inch thick.

Edges have been routed, sanded and on its way to finish room.

The holes have been drilled and next the edges will be routed.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Large Custom Four Person Dark Walnut Cribbage Board

This Large custom four person cribbage board has made its way to its new home in Denver, Colorado as a retirement gift.
The board was made out of dark walnut and roughly measured in at 32 inches long, 18 inches wide, and 15/16 inch thick.  It was accompanied with custom 3/16 inch metal pegs and a deck of cards.



This is the quote that they chose to have engraved on it, along with two small photo's

AGE IS AN ISSUE OF MIND OVER
MATTER.  IF YOU DON’T MIND ....
IT DOESN’T MATTER.
                                        -MARK TWAIN

The beautiful grain pattern really came out when the finish was applied.

Slot being cut for peg storage  on the back.

Metal slide added for pegs slot.

Glued in and ready for sanding

Dome laying in place

Dome I created using my lathe.

completed board except for the dome effect on the C

personalized signature on the back

CNC Router doing the engraving

CNC router drilling all the peg holes

Board is ready for the CNC router..

Design I created using CorelDraw approved by client.

The layout of the board was based on the Colorado State flag.

After the initial conversation this is the drawing the client provided

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/