Two Red Oak Custom Cocina Signs

These two custom signs were made for a client to be given as gifts for family members.

Cocina = Kitchen

They were made out of Red Oak and are 3 inches wide by 19 1/4 inches long.

The lettering was done using a CNC router

 

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Pullout Cutting Boards

These two custom pull out cutting boards were created out of Maple. They are headed to a kitchen in California.
The breadboard ends assist in keeping the boards flat for sliding in and out of the slots in the cabinets. 'They are finished using a food grade mineral oil.

Per the client request finger grooves were placed on both sides and both ends so that both ends and sides could be used..

23 inches wide 17 1/2 inches long  1 inch thick

23 5/8 inches wide 23 1/2 inches long  5/8 inch thick

Second cutting board layout

breadboard ends in glue up and clamps

glue up complete, now to add breadboard ends

First glue and clamp up.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Indiana Shape Cribbage Board.

This custom CNC cut shape of the State of Indiana with a four person track and sporting the lasered rugby guy image. It was made out of Maple and is around 12 inches wide, 18 inches long and 1 inch thick.

There is custom slot on the back for storage of the metal pegs that comes with each board.

The finished project came out very nice.

Close up of the lasered image.

Slot on back side for storage of the custom metal pegs/

Lasering done and ready for sanding and finishing.

Close-up of the lasering.

Slot on back for custom metal pegs.

Cut to shape and drill a four person track with skunk lines.

I will add the shape of the rugby players minus all the test.

I start with the shape of the State of Indiana

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/