This custom cutting board was created to replace the old worn out one and is on its way to Washington State to its new home.
It slides into the counter top for storage and has fingers pulls on each side opposite ends so it can be flipped and used both ways. It can also be pulled out for use on the counter or somewhere else.
The center portion is made using hard maple with oak being used for the breadboard ends. Breadboard ends help keep the board flat and add color.
The measurements are: 17 3/4" wide x 24 1/2"
long, and 3/4" thick. Once completed a food grade mineral oil is applied to preserve the wood.
 |
| Completed custom cutting board |
 |
| Sanding complete and first coat of oil applied |
 |
| Finger pulls have been created |
 |
| Now gluing the breadboard ends on |
 |
| Glue and clamp the main boards |
 |
| Choosing the boards for this project. |
Stay tuned for more updates soon......:-)
****************************************************************
For more information about ordering your own custom board go to:
http://www.splinterswoodworks.com/
No comments:
Post a Comment