Custom Four Person Cribbage Board for 2011 Klondike Challenge Champion

This custom cribbage is being created for the Klondike Challenge in Washington State.  It was made out of Cherry and is 8 inches wide and 18 inches long.

The finish has been applied and this custom board is soon heading to Washington State and the 2011 winner.

The board after being lasered and holes drilled.

The piece of Cherry I chose for this project.

This is sketch provided by client.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Air Force Cribbage Board Design

This custom design was re-created as a retirement gift for this clients husband.  After seeing one like it created several years ago, she thought it was the perfect gift.  

It is being created out of maple with the inlays being cut out of walnut. This board measures in at 12 1/2 inches wide and 12 1/2 inches tall and is almost 1 inch thick.

The finished custom cribbage board is on its way to Mississippi for it's special retirement ceremony.

Slot on left for holding custom pegs and key hole slot in center to hang it, and personal inscription below.

Laying out guidelines so holes can be drilled.

Once the inlays were completed the track was laid out and drilled. There also was a keyhole slot added on the back for displaying the board when not being played.

The inlay process has begun...

The shapes on the right are being  adjusted to fit the holes on the left.

The shape and the inlay's have been created using a CNC router system.

Original photo this project started with.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Pizza Peel for Jersey Boys Pizzeria, Whitefish, Montana

18 inch custom pizza peel

This custom pizza peel was created for the client to be given as a gift to the owners of a Whitefish, Montana pizzeria. 

Close up of logo

This peel is made out of birch and has an 18 inch paddle

logo provided to be laser engraved on this peel

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Large 4 person Gummy Cherry Cribbage Board

Large Gummy Cherry Cribbage Board

 This is a large 4 person cribbage board measuring in at around 30 inches long and 12 inches wide... It was created using a piece of Gummy Cherry wood. 

It is now on its way to its new home in Honoluliu, Hawaii.




Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Chile Pepper Cribbage Board

This order was placed for someone just entering the fourth grade. Where cribbage is used as one way of improving your math scores.

The board measures in at around 12 inches long and 4 inch wide.  I used a chili colored stain to give the red color and the stem I inlayed a piece of greenish popular wood.  The board was then given a hand rubbed poly finish.

Finished Two Person Cribbage Board.

I can't believe I haven't already done one of these for myself.

Before adding the color

Inlayed the stem using a piece of popular.

layout done on the computer.

This is the chile photo that was chosen by this client.  

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/

Custom Walnut Pizza Peel

It arrived! Thank you so much, it's so rare to run into good people especially willing to go the extra mile.

You didn't have to cram in our job, but you did, and we are very thankful.

It looks beautiful, and can't wait to wrap it and give it to him. I'll be sending people your way in the future as someone that delivers a great product and great to work with.
Thank you for everything,

Stacy

The request for this pizza peel/paddle comes from the the heartland of the Midwest, Lee's Summit, Missouri and is being created as a birthday present for the clients father.

This peel is being made out of  1/2 inch thick dark walnut and is 15 1/2 inches wide by 16 inches tall, with the overall length being 32 inches.   A hole was drilled in the top end of the handle and a leather strip was tied in so the peel could be hung up.  The front edge has a 3 inch bevel to be able to work with the pizza. It was engraved with an Epilog laser using Occidental font.

This custom peel is is coated with a food grade mineral oil finish which we recommend for all of our peels.
 

Recommended Care Instructions:

We highly recommend oiling your custom pizza peel frequently.

Over time oiling will preserve and protect woodenware from

splitting and cracking.  Wash peel with a mild detergent,

not allowing the board to soak.  Dry the board, and apply

an even amount of a “food safe mineral oil” with a soft

cloth.  Remove any excess oil.

Warning:

Do not use any kind of vegetable or olive oil as they tend

to turn rancid.

Your pizza peel is not dishwasher compatible.

Enjoy your custom pizza peel

Food grade applied to finished peel

Close up of the lasered lettering and box

Personalized laser engraving added.

Glue and blue protective tape removed and sanding begins.

Out of glue up.

Chosen boards cut to size and in glue up.

Stay tuned for more updates soon......:-) ****************************************************************

For more information about ordering your own custom board go to: http://www.splinterswoodworks.com/